Scope

This SIG develops and maintains technical documents for measuring devices and closed-loop controllers including pressure, force, and temperature sensors.

Chair

Uwe Koppe, MicroControl

Meetings

There are no events in the current view.

Minutes

Name Date Size Action
IG03 SIG04 Measuring devices 2023-08-07 124 KB Login
IG03 SIG04 Measuring devices 2023-10-12 124 KB Login
IG03 SIG04 Measuring devices 2023-04-25 226 KB Login
Title Details
Published
Size
Status
Action
CiA 404 version 1.2.0 CANopen profile for measuring devices and closed-loop controllers
Scope

TThis document represents the device profile for measuring devices and for universal controller devices for measuring or controlling physical quantities like temperature or pressure. These devices use communication techniques which are conform to those described in /2/. This document should be consulted in parallel to this profile.

 2002-05-15 2 MB PAS Login
CiA 404-2 version 2.0.0 CANopen profile for measuring devices and closed-loop controllers - Part 2: EUROMAP implementation
Scope

This specification represents the device profile for measuring devices and for universal controller devices for measuring or controlling physical quantities like temperature or pressure. These devices use communication techniques which are conform to those described in /CiA301/. The CANopen device profile for measuring devices and closed-loop controllers consists of several parts: • Part 1 defines the generic objects and the generic PDO mapping; • Part 2 defines the EUROMAP specific parameters. This part specifies the additional objects needed for EUROMAP 75 measuring amplifiers parameters and EUROMAP 66 heating/cooling device parameters.

 2013-08-01 441 KB DSP Login
CiA 404-1 version 2.1.0 CANopen profile for measuring devices and closed-loop controllers - Part 1: Generic objects and generic PDO mapping
Scope

This document specifies the device profile for measuring devices and for universal controller devices for measuring or controlling of physical quantities such as temperature or pressure. The CANopen device profile for measuring devices and closed-loop controllers consists of two parts: • Part 1 defines the generic objects and the generic PDO mapping; • Part 2 defines the EUROMAP specific parameters. This part specifies the parameter for the digital input and output blocks resp. the analog input and output blocks. Additionally, it specifies the alarm and control as well as the device function block.

 2016-07-19 3 MB DSP Login