12th international CAN Conference
The 12th iCC took place in Barcelona, Spain in 2008. The conference program included sessions on network topologies, physical layer, and system design. Other topics were motion control, vehicle applications, and fault tolerance.
Vector Informatik sponsored the 12th iCC.
| Conference | Session | Author | Title | Action |
|---|---|---|---|---|
| iCC 2008 | Automotive applications |
H. Zeltwanger |
CANopen in light electric vehicles |
Download |
| iCC 2008 | Automotive applications |
L. Ruiz-Garcia |
CAN-based monitoring in refrigerated transports |
Download |
| iCC 2008 | Automotive applications |
J. Murgoito Larrauri |
Networking Sensors with CANopen for some AmI applications |
Download |
| iCC 2008 | Building automation |
Prof. Dr. F. Linera |
A low cost node based on CAN I/O Expanders to detect people on escalators and moving walkways |
Download |
| iCC 2008 | Building automation |
R. Haertel |
CANopen-controlled personnel interlock system at DESY |
Download |
| iCC 2008 | Building automation |
J. Fonseca |
Using CAN to retrofit houses for quadriplegic people |
Download |
| iCC 2008 | Fault tolerance |
T. Vardhaman |
Implementation of Fault Tolerant Network Management System for CAN Bus using CANopen |
Download |
| iCC 2008 | Fault tolerance |
P. Oikonomidis |
MilCAN Fault Tolerance Layer |
Download |
| iCC 2008 | Fault tolerance |
M. Barranco |
Management of Media Replication in ReCANcentrate |
Download |
| iCC 2008 | Motion control applications |
E. Yime |
CAN on Parallel Robots: How to Control a Stewart Platform using CAN based motor controllers |
Download |